Progress with the Nightdresses!!

Close up (ish) of my plans so far!

I have decided that the "star" in the 4th block - as yet white on the plans because I don't know how many of the other blocks I can make - will contain a point from 4 each of the nightdresses, and a white patterned border. I am waiting to confirm this after seeing how much I have and how many of the other blocks I can make. I want to make minimum 4 each of the first 3 blocks. I can play around with borders etc if I have that many, and still get away with a Queen sized quilt, I hope.

Overtaking the kitchen table - cutting, fusing, calculating numbers of triangles and squares I have enough to cut so far



Fabric looking more like...fabric...

 This is the result of my first night's measuring and cutting. I ended up being able to buy a roll of fusible web stabiliser for $9. It was a 10m roll and the lady at Spotlight suggested it instead of what I was about to buy following a chat with her, and she saved me some money. I'm glad about that because I also had a look at the queen sized wadding packages and they're not cheap... plus I think it will need to be professionally quilted to do it justice when I've finished... will see about that. I need to try to finish the quilting on the single bed sized quilt I have made (Spaceranger) and from which the idea for this quilt top has come.

I didn't fuse the pink fabric, but it was starched as I went, and I *think* it will be ok not backed. It's going to have to be I think unless when I start to sew it looks shocking in which case I will carefully have to back the strips and even more carefully cut them back out again. I don't think they will be accurate enough if I do that.

Backing the white fabric (the absolute thinnest and worst quality in sewing terms of all the dresses bar the other white pattern) I discovered that cutting the strips slightly wider, then backing them, then trimming them to the width I wanted was the most accurate way of getting the strips right.

The strips I am cutting are 3 1/2 in strips for the corner squares, and 3 7/8 in strips for the triangles. I've tried this both ways with triangles - first time I did le Moyne Star (first memory quilt) I was advised by a quilt shop assistant to cut them to 4in, and then do the triangles, and then trim to size at the end. This allows for problems with accuracy. But I am accurate when I sew and actually I just found this frustrating and more work. So the next Le Moyne I did (Spaceranger, as yet a UFO ha ha) I cut them exactly to 3 7/8 and the blocks were perfect. Am hoping they will be something like that again. ;)

I've since (because blogger's been down) cut some more and backed some more... and now the green fabric has been transformed into strips of 3 1/2 in and 3 7/8 in. I have labelled the strips on scraps of paper, measuring how many squares I can cut out of each strip (because of course the strips are not uniform length having originated from nightdresses rather than a nice roll of fabric!) and pinned the information. I am keeping a record of how many squares and triangles I can make from each one. I will then sit down and work out how many blocks  I can make. It seems a bit Heath Robinson to work it out as I go along like this but as I am not working from a pattern that tells me how many squares and triangles I need (and even if I did know that, I don't actually know how many each nightdress will yield).

I will decide on the border widths and fabrics once I have made the blocks and discovered how many I can do. I am hoping for 20 blocks, 4 across, 5 rows, and then thin borders between them, larger border round the edge.

Now I have the strips nicely starched, backed and pinned with the papers - they 'look' like fabric now and I am actually looking forward to cutting and piecing the blocks. It really has transformed the fabric and reassured me that I have enough (which I was worrying about).

I am reserving judgement on the bridesmaid dress. I had thought, looking at my plans, it might make an acceptable border, with the red section being the squares pieced into the border. But I looked at the dress again last night and I am just not sure. My neighbour is a dressmaker. When I have the blocks made I will lay them out with her, get her opinion on whether I should cut up the dress and use it or not. I don't want to cut it up and not use it!!!!! Wouldn't care if it was mine, or Op Shop in origin but it's a sentimental garment and does not deserve that treatment!

So my progress and process is charted. Nice to keep track of a project in this way, and actually it is helpful in keeping me accountable to making progress. I am working on it daily at the moment, in the evening. I will retreat back to the sewing room when I've done the cutting but for now, I need the bigger table, ironing board, and am enjoying the company with Matthew while we watch replays of Australian Masterchef on the computer. Can't abide the adverts so we are watching it online after the episodes have been put up.

Research

I asked on a forum for advice about stabilising the night dresses for the quilt. I had a reply helpfully suggesting that I go for a lightweight knit fusible stabiliser.

Now I just have to find one. I am going to ring around today but I just googled and found this very useful page on Pellon stabilisers:

http://www.pellonideas.com/SubSections/Interfacings_Apparel.aspx

Very helpful resource, actually, gives me some different options to ask for. And something else to google! I am just hoping it isn't too expensive.

New Project...

I've been procrastinating, partly, before beginning this next new project. It's going to have to be "design as I go" to some extent because I am upcycling, to coin a term, clothes into a memory quilt. It is for a friend of a  friend. The fabrics are predominantly patterned nighties of her late mother, 2 PJ tops of (I presume) her children, and a bridesmaid dress.

So it's a challenge, for sure. I have been thinking about how to do this for some time, and have settled on Le Moyne Star, mainly because I have done that block a couple of times before, and I think it will work ok for the nighties, as I've already done it out of mens' shirts before for my first memorial quilt.

I'm not sure, as yet, how to use the bridesmaid dress - originally there was a design I fancied using that did ask for a silk to go on the blocks. My issue with this is that the quilt was a bit too small to be useful and I think the recipient really has a bed quilt in mind.

So this is going to be my first "Quilt Process" pledge project. I'm going to be a while making it, perhaps, and it is interesting (and brave) to track it as I go along.

First photos are the original clothes I am working from, then the fabric  and buttons, lace and ribbon I am left with after cutting the seams open and harvesting the fabric and buttons last night.

Planning stage:

• So now I am using graph paper and trying to work out the design and how much fabric I have.
• I also need to research how to stiffen the fabrics I am working with. The fabric is (unfortunately) poly cotton, emphasis on the poly! My experience with the shirts tells me that simply starching this fabric isn't going to be enough. The poly cotton shirts were terrible to work with.
• The other reason I need to do something to the fabric is that especially the white fabric is very flimsy and will be somewhat transparent - it will show the seams, the batting, and just needs a denser white behind it. I am hoping that this isn't going to prove too expensive. I am going to have to find some sort of iron-on solution - interfacing?
• The bridesmaid dress is offwhite - not fantastic seening as 2 of the nighties are white based patterns. I also don't know how to use the red without totally drowning the quilt. Mmmmm quite a challenge then.
• The little PJ shirts will probably have to make tiny squares to go within the border. I am thinking the bridesmaid dress ivory fabric ought possibly to be used in the border.
• I may have to buy a co-ordinating quilt fabric to make the materials go further. And probably for the border / definitely for the backing.
• The finished quilt will have buttons on it in some form, and I'd also like to use the little ribbons I cut off last night when I was beginning the fabric preparation.

Next post - early planning pics.

Not that I am taking the pledge too seriously but it is important in this case I think for me to keep track of my planning, and possibly interesting for someone else to see how I work. I am totally self taught so have no idea whether there are better ways of doing these things.

This quilt is to celebrate life. Family life. Remembering a loved one and joining with the present. It's what Sew La Vie came from - a real burden for Life. I'm praying I can do a good and fitting job to bless a dear friend's dear friend...